Filter
Top Products
CHAPTER THREE
Operation
Setting the Time and Date
First, select the channel that has a Digital Signal.
1
Press the MENU button on the remote control.
2
Use the Menu Up/Down buttons
to highlight the Setup icon and
press ENTER.
Use the Menu Up/Down buttons
to highlight the Auto Time Setup
icon and press ENTER.
3
You will be asked if your local
area observes Daylight Savings
Time. Use the Menu Up/Down
buttons to highlight Yes or No,
and press ENTER.
4
Use the Menu Up/Down/Left/
Right buttons to highlight the time
zone for your local area (and to
move the highlight to the
appropriate time zone on the
map of the United States).
Press ENTER.
That’s it. As you have received a digital signal, the time will be
set automatically.
5
Press EXIT
3
3
3.6