Samsung DVD-VR300 MP3 Player User Manual


 
Recording
62 - English
Turn the power off to finish the timer recording.
will blink if disc or tape is not inserted.
4
The timer recording time may differ from the set
time depending on disc status and overall timer
recording status (for example, recording times
overlapping, or when the previous recording ends
within 2 minutes before the start time of the next
recording.)
Note
Press the ENTER button.
will appear on the front panel. It means that a
timer recording is registered.
If you make a mistake
Press the
➛❿
button to select the item you want to
change.
If the timer settings overlap
The programs are recorded in order of priority. If
timer recording is set for the first program and then
again for the second program and both programs
overlap, the following message will appear on the
screen: “This setting is identical with 1”
The message shows that the first program has priori-
ty. After recording of the first program is complete,
the second program starts being recorded.
To exit without saving the current setting
Press the MENU or TIMER REC button.
To return to the previous menu
Press the RETURN button if you don’t want to set a
timer recording.
3
Set timer recording option.
• The Timer Recording screen is displayed. Fill the
input items using the arrow buttons.
➛❿: Moves to the previous/next item,
❷: Sets a value.
TO : Select the media to record DVD or VCR.
SOURCE : The video input source (L1 or L2), or
the broadcasting channel you want to
make a timer recording from.
Date : Set the recording day.
Start/End Time : Start and end time of the timer
recording.
Type (Recording cycle).
Once : Records once.
Weekly : Records at a set time every week.
Daily : Records at a set time every day.
Mode (Recording mode).
2
DVD
AUTO : Select when you want to set video quality automati-
cally. It depends on the remaining time on the DVD.
XP (high quality) : Select when audio and video qualities are
important. (Approx. 1 hour)
SP (standard quality) : Select to record in standard quality.
(Approx. 2 hours)
LP (low quality) : Select when a long recording time
is
required.(Approx. 4 hours)
EP (extended mode) : Select when a longer recording time is
required. (Approx.6 hours about 1.2
Mbps)
VCR
AUTO : Select when you want to set video quality automati-
cally. It depends on remaining time of VCR tape.
SP : Standard Play, for best picture quality.
SLP : Super Long Play, for maximum recording time (3
times SP).