Filter
Top Products
ENG-21
C
ONNECTIONS
Connection to an Audio System
Connection to an Audio System (2 Channel Amplifier)
1
Using the audio cables, connect the (LINE)
AUDIO (red and white) OUT
terminals on the
rear of the DVD-VCR to the
AUDIO (red and
white) IN
terminals of the Amplifier.
2
Using the video signal cable(s), connect the
VIDEO, S-VIDEO or COMPONENT OUT
terminals on the rear of the DVD-VCR to the
VIDEO, S-VIDEO or COMPONENT IN terminal of
your TV as described on pages 15 to 18.
3
Turn on the DVD-VCR, TV, and Amplifier.
4
Press the input select button of the Amplifier to
select the
External input in order to hear sound
from the DVD-VCR.
Refer to your Amplifier's user manual to set the
Amplifier's audio input.
Notes
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage
to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier. (See pages 61 to 62)
- The position of terminals may vary depending on the Amplifier.
Please refer to your Amplifier's user manual .
-You can also connect the amplifier using AUDIO OUT (red and white) terminals from the DVD-VCR.
Red
Audio Cable
White
Red
2-channel
Stereo Amp.
White
00956F V9650 XAA_Eng1*04 soft * 17/3/06 09:04 Page 21