Filter
Top Products
23
ENGLISHENGLISH
22
DIGITAL OUT
DIGITAL
COAXIAL OPTICAL
Connecting to a Stereo Component
Playing Dolby Digital (5.1-CH) and DTS Audio
•
You can enjoy full and dynamic surround sound by connecting a Dolby Digital/DTS
digital surround processor or amplifier to the optical digital jack on the DVD player.
•
When using DTS digital surround, select the DTS audio by using the disc menu screen
or function adjustment screen.
After making the connections shown above;
Set the
“Dolby Digital Out”
to “Bitstream” (see page 54) in “Audio Setup”.
Caution
•
To play a DTS disc, you need a DTS processor or amplifier.
•
If the DTS processor or amplifier you want to use does not have an optical digital input jack,
digital connection is not possible.
•
Refer to owner’s manual of the processor or amplifier for details on connections.
Optical Digital Cable
(Not supplied)
Connect to an Optical Digital Input Jack
Dolby Digital (5.1-Channel)/DTS
processor or amplifier
DIGITAL
COAXIAL OPTICAL
DIGITAL OUT
After the completion of above connections;
Set the “Dolby Digital Out” to “PCM” (see page 54) in “Audio Setup”.
■ Digital connection to an audio component without a Dolby Digital decoder
• Audio CD
Play the disc.
When connecting digitally, DTS-encoded audio tracks will produce distorted sound.
• DVD Disc
When playing a Linear PCM Audio encoded disc, you must use the digital connection
method shown above.
NO
TE:
Only use an optical Digital Cable which has been designed for use with portable DVD.
Connecting to a Stereo Component
ENGLISH
Optical Digital Cable
(Not supplied)
Audio component
equipped with optical
digital input jack
Connect to optical digital input jack
Digital Audio Output (optical)