Filter
Top Products
7
Español Italiano Français Deutsch English
Connections
Attaching the Rubber Feet
(Included)
Precautions When Connecting
and Turning on the Power
921
• To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the power
on all devices before making any connections.
926a
• When connection cables with resistors are used, the volume level
of equipment connected to the inputs (Input Jucks) may be low.
If this happens, use connection cables that do not contain
resistors, such as those from the Roland PCS series.
941
• Once the connections have been completed, turn on power to
your various devices in the order specified. By turning on
devices in the wrong order, you risk causing malfunction and/or
damage to speakers and other devices. (When turning the power
off, reverse this procedure.)
< Connected devices
→
DM-10 >
942
• This unit is equipped with a protection circuit. A brief
interval (a few seconds) after power up is required before
the unit will operate normally.
Connection Example
INPUT
(FROM RIGHT)
OUTPUT
(TO LEFT)
Sound Module, CD Player, MD Player, etc.
Select
* When you connect a cable to the
DIGITAL IN on the front panel, the
sound of any devices connected to
the DIGITAL INs on the rear panel
will not be heard.
Priority (*)
Front Panel
Rear Panel
DM-10_efgis 7ページ ２００４年１月８日 木曜日 午後１時５９分