Filter
Top Products
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
Operating your radio using RDS (Radio data system)
1. Switch on your radio and select the FM waveband.
2. Tune into a station, the display will indicate frequency for two
seconds and then change to show the station name. The
symbol will appear in the display
3. If the station does not carry RDS information only the station
frequency will be shown.
Note: The indicator will flash if the signal is too
weak for RDS operation.
Display Modes
1. Whilst tuned to an RDS station you can change between station
name and normal time display by pressing the Display button.
Alternate Frequency (AF)
The RDS system provides a list of alternative frequencies for the station
you are tuned to.
1. Switch on your radio and select the FM waveband. Tune into a
station carrying RDS information.
2. Press the AF button, your radio will scan the list of alternate
frequencies and select the one giving best reception. If AF informa-
tion has not yet been received or is not provided by the station you
are listening to, the radio will remain at the current frequency and the
display will indicate 'NO AF'
16
r9999 instruction book.PMD 7/28/2005, 4:07 PM17