Roberts Radio R9999 Portable Radio User Manual


 
Setting the alarm time
1. Press and hold down the Alarm button.
2. Whilst the Alarm button is held down set the alarm time by rotating
the Tuning control or by pressing the Up or Down buttons. The
clock uses the 24 hour system e.g. 2:30pm is shown as 14:30. At this
stage disregard symbols.
3. Release the Alarm button when alarm setting is complete.
Displaying the alarm time
1. Ensure that the radio is switched off.
2. Press the Display button once to display alarm time. Clock time will
resume automatically after 3 seconds.
Wake to buzzer
1. Set the alarm time as previously described.
2. Switch off your radio using the Power Button. Repeatedly press
and release the Alarm button until the symbol appears in the
display.
3. At the preselected time the buzzer will turn on. The buzzer will
switch off automatically after 90 minutes. The buzzer alarm may be
turned off for 24 hours by pressing the Power button.
4. To permanently cancel the buzzer alarm repeatedly press and
release the Alarm button until the and symbols are
removed from the display.
9
r9999 instruction book.PMD 7/28/2005, 4:07 PM10