Roberts Radio R9995 Portable Radio User Manual


 
7
Battery
1. Open the battery cover located on the rear of your radio by sliding
it in the direction shown by the arrow.
2. Insert one LR03 (AAA) size battery into the compartment. Ensure
that battery is inserted in accordance with the diagram shown on
the rear of your radio and close the battery cover.
3. Battery should be replaced when the low battery indicator
fl ashes and “E” appears in the display .
4. During battery replacement ensure that the radio is turned off and
the Lock switch is in the “Lock” position. Battery replacement
should be completed within three minutes to prevent loss of
stations stored in memory presets.
5. If the radio is not to be used for a long period, set the Lock switch
to the “Lock” position, this will reduce power drain on the batteries
during storage .
6. Reduced power, distortion and a ‘stuttering’ sound are all signs that
the batteries may need replacing.
7. If the radio is not to be used for an extended period of time it is
recommended that the battery is removed from the radio.
IMPORTANT: The batteries should not be exposed to excessive heat
such as sunshine, fi re or the like. After use, disposable batteries should
if possible be taken to a suitable recycling centre. On no account
should batteries be disposed of by incineration.