Filter
Top Products
13
Scan tuning
1. Switch on your radio by pressing the Power button.
2. To select the required waveband repeatedly press the Band button.
The earphone lead should be extended as much as possible to
increase reception. For MW (AM) reception there is a built in ferrite
aerial. Rotate your radio to the position giving best reception.
3. Press and hold down either the Tuning Up or Down buttons until
the frequency in the display begins to change rapidly. Release the
button. Your radio will scan the FM1, FM2 or MW (AM) band and
stop automatically when it fi nds a station of suffi cient strength.
4. Adjust the Volume control to the required setting.
5. Press and hold down either the Tuning Up or Down buttons for
more than half a second to resume scan tuning.
6. When the waveband end is reached your radio will continue tuning
from the opposite waveband end.
7. To switch off your radio press the Power button.