Filter
Top Products
If you need any further advice, please call our Technical Helpline on :-
0181 758 0338 (Mon-Fri)
Operating the radio
1. Your radio is equipped with four tuning methods:- Scan tuning, Rotary
tuning, Manual tuning, and Memory preset tuning.
Scan tuning
1. Press the Power button to turn on the radio.
2. Select the required waveband by repeatedly pressing the Band button.
For the FM waveband fully extend the Telescopic aerial and set it at
an angle of 45 degrees.
3. Press and hold down either the Tuning up or Tuning down buttons
for more the 0.5 sec to commence scan tuning.
4. The radio will scan the selected waveband and stop automatically when
it finds a station of sufficient strength. The tuning indicator will
appear in the display.
5. To recommence scan tuning, press and hold down either the Tuning
up or Tuning down buttons for more the 0.5 sec.
6. When the waveband end is reached the radio will bleep and continue
tuning from the opposite waveband end.
7. Rotate the Volume control clockwise to increase the volume and
anticlockwise to decrease the volume. Set the Bass and Treble
controls to the desired settings.
8. To turn off the radio press the Power button.
Power
Band
Time
Set
Manual/Auto Seek
Tuning
FM
MHz
FM
MHz
Manual/Auto Seek
Tuning
FM
MHz
MaxMax MinMin
Display
Light Band
Manu al/Auto Se ek
Tuning
BassTreble
R 983
FM/M W/LW PLL Di
g
ital Radio with Synthesized Tunin
g
Time
Set
Lock
87.0 -108MH z
522- 1710 kHz 144-281 MHz
8