Filter
Top Products
27
CD / MP3 / WMA .
CD track programming
In addition to playing of complete CDs, selected tracks, or a random
selection, the CD player allows you to programme a sequence of up to
20 tracks to be played in whatever order you choose.
1. With the unit in CD mode and with a CD inserted, make sure that the
CD is stopped (press the Stop / Select button).
2. To enter programming mode, press the
Menu button.
3. Choose the first track using the
Fast-forward or Rewind buttons.
4. Press the Menu button to enter the selected track into the
programme.
5. Choose another track using the
Fast-forward or Rewind buttons,
and enter it into the programme using the Menu button (track 6 in
example shown).
6. Repeat step 5 to store as many as 20 tracks in the programme.
7. When the programme is complete, press the Play / Pause button to
start playing. The tracks will then be played in the order that you have
just programmed.
8. Pressing the Stop / Select button, or switching to another operating
mode will erase the programme.
Note: If you are programming the tracks using a CD with MP3 or WMA
files in folders (see the following pages), you can also use the
Up or Down
Folder buttons to specify the folder in steps 3 and 5 above.
1
2
3,5
3,5
4,5
7
CD
CD
CD