Filter
Top Products
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
10
Dynamic range control (DRC)
DRC can make quieter sounds easier to hear when your radio is used in
a noisy environment.
There are three levels of compression:
DRC 0 No compression applied. (default)
DRC 1 Maximum compression applied
DRC 1/2 Medium compression applied.
1. Press the On/Off button to switch on your clock radio.
2. Press the FM/DAB button to select the DAB band
3. Press and hold down the Menu/Display button until the display shows
"MANUAL
4. Press the Tuning up or down buttons until “DRC VAL” appears on
the display. then press Select button. The display will show the current
DRC value.
5. Press the Tuning up or down buttons to select the required DRC
setting. Default is 0.
6. Press and release the Select buttontoconrmthesetting.Thedisplay
will return to radio mode.
2,6
2
4,5
4,5
3
6