Filter
Top Products
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
6
Operating your clock radio - DAB
1. Fully extend the wire aerial.
2. If your clock radio is in standby mode, press the On/Off button to
switch on your clock radio.
3. Press and release the Function button to select DAB. The display
will show "DAB" and then " Now tuning" for a few seconds.
4. If this is the fi rst time the clock radio is used a quick scan of UK Band
III DAB channels may be carried out (the scan is normally performed
automatically when the clock is fi rst set - page 5). If the clock radio has
been used before, the last used station will be selected. If new radio
stations are found, they will be added to the stored list of stations.
5. When fi rst switched on, the fi rst station in the list of stations found will
be played. The display will show the station name in the fi rst line of
the display and other information in the second line.
6. If the station list is still empty after the scan operation your clock radio
will display "Station not available".
7. If no signals are found it may be necessary to relocate your clock radio
to a position giving better reception, and then repeat the scan using
the AutoScan facility (page 9).
2
3