Filter
Top Products
11
Dynamic Range Control (DRC) settings - DAB only
Dynamic Range Control (also known as DRC) can make quieter sounds
easier to hear when your radio is used in a noisy environment. This function
is only available for the DAB waveband.
1. Press the On/Off button to switch on your clock radio.
2. Press and release the Menu button until "Station order" appears on
the display.
3. Press and release the Tuning Up or Down buttons until the display
shows "DRC value".
4. Press and release the Select button to enter adjustment mode. The
top line of the display will show the currently applied DRC setting.
5. Press and release the Tuning Up or Down buttons to select the
required DRC setting (default is 0) .
DRC 0 DRC is switched off, Broadcast DRC will be ignored.
DRC 1/2 DRC level is set to 1/2 that sent by broadcaster.
DRC 1 DRC is set as sent by broadcaster.
6. Press and release the Select button to confi rm the setting. The display
will return to radio mode.
Note: Not all DAB broadcasts are able to use the DRC function. If the
broadcast does not support DRC, then the DRC setting in the clock radio
will have no effect.
1
2
3,5
3,5
4,6