Roberts Radio CRD-36 Clock Radio User Manual


  Open as PDF
of 36
 
7
Operating your radio - DAB
1. Fully extend the wire aerial.
2. If your clock radio is in standby mode, press the
Standby button
[On/off on the remote control]
to switch on your clock radio.
3. Press and release the
Function button to select DAB. The display
willshow"DAB"andthen"Nowtuning"forafewseconds.
4. IfthisisthersttimetheclockradioisusedaquickscanofUKBand
III DAB channels will be carried out. If the clock radio has been used
before the last used station will be selected.
5. During autotune as new stations are detected the station counter on
the right hand side of the display will increase and stations will be
addedtothelist.Thedisplaywillshowthestationnameintherst
line of the display and other information in the second line.
6. WhentheAutotuneiscompletetherststation(innumeric-alpha
order 0...9...A....Z) will be selected.
7. If the station list is still empty after the Autotune your radio will display
"Stationnotavailable".
8. If no signals are found it may be necessary to relocate your radio to
a position giving better reception.
2
3
 previous next