Roberts Radio CRD-29 Clock Radio User Manual


  Open as PDF
of 24
 
Fuse
Thisapparatusmustbeprotectedbya3Afuse(BS1362)ina13Aplug
(BS1363).Ifanothertypeofplugisuseda5Afuseshouldbettedinthe
plug, adaptor or distribution board.
IF IN DOUBT - CONSULT A QUALIFIED ELECTRICIAN.
The wire coloured BLUE must be
connected to the terminal marked N
or coloured BLACK.
The wire coloured BROWN must be
connected to the terminal marked L
or coloured RED.
General
Donotallowthisunittobeexposedtomoisture(e.g.drippingorsplashing)
or to temperatures exceeding 70 degrees centigrade. It is recommended
that the DAB band be used wherever possible as better results in terms
of quality and freedom from interference will usually be obtained than on
the FM band.
No objects lled with liquids, such as vases, should be placed on
the apparatus.
The name plate is located on the underside of the unit.
Mains supply
The CRD-29 will operate from a supply of AC 230volts, 50Hz only.
Foryourconveniencethisproductissuppliedwithaplugwhichistted
with a fuse of the appropriate rating. If the plug supplied is not suitable
for your socket outlet, it should be removed by unscrewing the plug top,
the terminal screws and removing the cable.
The correct style of plug to suit your household together with a correctly
ratedfuseshouldbetted.
IF IN DOUBT - CONSULT A QUALIFIED ELECTRICIAN
IMPORTANT. DO NOT make any connection to the larger terminal which
is marked with the letter E or by the safety earth symbol or coloured
Green or Green-and-yellow.
The wires in the mains lead are coloured in accordance with the following
codes :-
BLUE - NEUTRAL BROWN - LIVE
As these colours may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows:-
21
 previous next