Filter
Top Products
7
Checking the Alarm Times
1. To check alarm 1 time, press the Alarm 1 button (
1
) the display
will show alarm 1 time whilst the button is held down.
1
2. To check alarm 2 time, press the Alarm 2 button (
2
) the display
will show alarm 2 time whilst the button is held down.
2
Setting the alarms to wake to buzzer
1. Set the alarm time as previously described.
2. Set the Alarm 1 function switch or Alarm 2 function switch to the
'Buzz' position. The corresponding Alarm indicators will light.
3. The buzzer alarm will sound every day at the preset time for 59 minutes.
4. To turn off the alarm until the next day press the On/Off button.
5. To turn off the alarms permanently set the Alarm 1 function switch
or Alarm 2 function switch to the 'Off' position.
To make a distinction between alarm 1 and alarm 2 the alarm signals
have a different sound pitch:
Alarm 1 = lower pitch alarm signal
Alarm 2 = higher pitch alarm signal
R adio B uzz O ff
1
R adio B uzz O ff
2
1
2
On/Off
R adio B uzz O ff
1
R adio B uzz O ff
2
CR9910 Instruction Book.pm6 24/10/99, 13:508