Filter
Top Products
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
Setting alarm times
Your alarm clock radio has two separate alarms which can be set to
activate at different times. The alarms can be set to wake you by either the
buzzer or the radio.
Note: In the event of a power failure the backup battery will ensure that the
alarm sounds at the preset time.
Setting alarm 1
1. Press and hold down the Alarm 1 button (
1
).
2. Whilst holding down the Alarm 1 button (
1
) press the Forward
button or Reverse button to set the required alarm time. Release the
buttons when the correct alarm time is reached. The clock uses a 24
hour display.
Setting alarm 2
1. Press and hold down the Alarm 2 button (
2
)
1
Reverse Forward
2. Whilst holding down the Alarm 2 button (
2
) press the Forward
button or Reverse button to set the required alarm time. Release the
buttons when the correct alarm time is reached. The clock uses a 24
hour display .
2
Reverse Forward
6
CR9910 Instruction Book.pm6 24/10/99, 13:507