Filter
Top Products
Setting the alarms to wake to buzzer
1. Set the alarm time as previously described. Set the Function switch
to the 'Buzz' position. Set the Alarm selector switch to the '
1
',
'
2
' or '
1+ 2
' position. The corresponding Alarm indicators will
light.
The buzzer alarm will sound every day at the preset time for 59
minutes. To turn off the alarm until the next day press the Alarm/Off
button. To turn off the alarms permanently set the Function switch
to the 'Off' position.
To make a distinction between alarm 1 and alarm 2 the alarm signals
have a different sound pitch:
Alarm 1 = lower pitch alarm signal
Alarm 2 = higher pitch alarm signal
Setting the alarms to wake to radio
1. Set the alarm time as previously described. Set the Function switch
to the 'Auto' position. Set the Alarm selector switch to the '
1
', '
2
'
or '
1+ 2
' position. The corresponding Alarm indicators will light.
Ensure that the volume is set to the correct level and the desired station
is tuned in.
The radio alarm will operate every day at the preset time for 59
minutes. To turn off the radio alarm until the next day press the Alarm/
Off button. To turn off the alarms permanently set the Function
switch to the 'Off' position.
Note: If an alarm time has not been set and the Function switch is
left in the 'Buzz' or 'Auto' position, the buzzer or radio will operate at
12:00 midnight. If you do not require the alarm function, ensure that
the Function switch is set to the 'Off' position.
7
1 1+2
2
O ff B u z z A u to O n
Off Buzz Auto O n
1 1+2
2
PM
1
2
PM
1
2
CR9902 Instruction Book.pm6 24/10/99, 13:498