Filter
Top Products
If you need any further advice, please call our Technical Helpline on :-
0181 758 0338 (Mon-Fri)
Listening to the Radio
1. Turn on the radio by sliding the Function switch to the 'On' position.
The LED dial pointer will light up indicating that the radio is switched
on.
2. Select the required waveband using the Waveband selector switch.
3. Tune in to the desired station by rotating the Tuning control. The
station frequency is indicated by the LED dial pointer.
The Wire aerial located on the rear of your clock radio is for FM
reception. The wire should be fully extended and positioned for
optimum reception.
For MW and LW reception there is a built in ferrite aerial. Rotate your
clock radio to the position giving best reception.
4. Adjust the volume by rotating the Volume control.
5. The radio can be switched off by sliding the Function switch to the
'Off' position.
Note: if the radio does not switch off, this may be caused by inavertent
operation of the Sleep button. Press the Alarm/Off button to cancel.
4
Off Buzz Auto O n
88
540
92
600
96
800
10 0
10 0 0
10 4 10 6
1300
10 8
1600
MHz
kH z
FM
MW
LW
150 170 210 240 260
kH z
FM LWMW
Tuning
88
540
92
600
96
800
10 0
10 0 0
10 4 10 6
1300
10 8
1600
MHz
kH z
FM
MW
LW
150 170 210 240 260
kH z
Volum e
Off Buzz Auto On
CR9902 Instruction Book.pm6 24/10/99, 13:495