Filter
Top Products
13
Operating your radio - FM
1. Carefully extend the telescopic aerial.
2. Press the On/Off button to switch on your radio. If your radio is
currently in FM mode proceed to step 4. (FM icon is displayed in
FM mode.)
3. If you were listening in DAB mode press the Station/Menu
button and then rotate the Tuning/Select control until 'TO FM'
shows on the display. Press the control to switch to FM mode.
4. Press the Auto Tune button. Your radio will scan in an upwards
direction (low frequency to high frequency) and stop automatically
when it fi nds a station of suffi cient strength.
5. After a few seconds the display will update. The display will show
the frequency of the signal found. If the signal is strong enough and
there is RDS data present then the radio will display the station
name.
6. Press and hold the Auto Tune button to scan the FM band in a
downwards direction (high frequency to low frequency).
7. When the waveband end is reached your radio will recommence
tuning from the opposite waveband end.
8. Rotate the Volume control to the required setting.
9. To switch off your radio press the On/Off button.
3
3,8
4,6