Rio Audio Rio Fuse MP3 Player User Manual


 
Table of Contents Index
6
Rio Fuse
Chapter 2 Connections
:: Basic Connections
The Rio Fuse must use a AAA-battery and will frequently be connected to earphones and your computer’s USB
port.
Battery
The Rio Fuse uses a single AAA-battery that can provide many hours of use. The Cap and the
Battery Compartment Cover must be removed before a battery can be installed.
Earphones
Connect the supplied earphones to the EARPHONES port on the top of the player.
USB
The Rio Fuse’s USB jack is designed to plug directly into the USB port on a computer. The Rio Fuse must be
connected to a computer’s USB port to transfer music or files to and from the player.
USB Detection with the Windows Device Driver
USB connectivity is ready to work immediately after Rio Music Manager has been installed.
If for any reason the Windows Device Driver Wizard is displayed after the USB cable has been
plugged into both the Rio Fuse and the computer, please follow these steps:
1 Confirm the Rio installation CD is in the computer’s CD-ROM drive.
2 Check the CD-ROM Drives box when the Windows Device Driver Wizard requests the
location of the Rio Fuse drivers.
3 Click Next and follow the Windows Device Driver Wizard instructions.