Filter
Top Products
5
Storing Radio Stations in
Memory
Preset up to five AM and five FM stations for easy access.
1. Choose the radio band and station.
2. Press (the Memory Preset button). The PRESET
indicator and the station frequency blink in the display.
3. Press one of the five TUNER PRESETS buttons to store the
radio station frequency in that preset location.
Recalling Preset Stations
1. Choose the radio band (AM or FM).
2. Press the appropriate TUNER PRESETS button (the
PRESET number appears in the display).
Using the Radio
Not only does the digital tuner help you tune in radio
stations more easily, it also lets you preset as many as
five AM and five FM radio stations for easy access.
Tuning In Radio Stations
After you choose the radio feature by pressing RADIO on the
Function Control, you can do the following:
• Press the BAND button to change the radio band to AM
or FM.
• Press the TUNING buttons to change the radio station.
• To turn on the Seek feature, which locates the next
station, press and quickly release the SEEK/SCAN button.
• To turn on the Scan feature which searches for stations,
press and momentarily hold the SEEK/SCAN button
before releasing it. When a station is found, the Scan
feature allows you to listen for a few seconds and then
moves to the next station. When you find a station you
like, press the SEEK/SCAN button again to choose that
station.
• Press the FM/MONO button to listen to FM stations in
either mono or stereo (STEREO appears in the display
when listening to FM stereo).
Note that AM stations are broadcast in mono only and
that the FM radio station must be transmitting in stereo
for you to receive it in stereo.
MULTI FUNCTION DISPLAY
D
igital
E
Q
PRESET
MHz
FM
RADIO
STEREO
Playing Hide and Seek
Sometimes the Seek and Scan features
might not locate an available station
because the signal is not strong
enough. If you know the frequency of
the station you’re looking for, you
might want to use the TUNING
buttons instead.
Weak Reception?
If the reception of an FM station
transmitting in stereo is weak, the
STEREO indicator might fade in and
out. Adjusting the FM whip antenna
can help. If not, changing from FM
Stereo to FM Mono might improve
reception (just remember that you’ll
no longer be listening in stereo).
M
TUNING
DISC
RADIO
TAPE
BAND SEEK/SCAN FM MONO
TUNER PRESETS
1
2
3
4
5
M