RCA M2001G MP3 Player User Manual


 
Inserting a SD card /
MultiMediaCard
The player has built-in flash memory. To
extend the playtime, you can use the
optional SD/MMC card slot.
1. Insert a Memory Card into the
SD/MMC card slot on the top of the
player when it is off as illustrated in
the diagram below.
2. To remove the card, pull the Memory
Card out when the unit is off.
Connecting the Player to
your computer
1. Lift the cover that is covering the USB
port on the player.
2. Insert the smaller end of the USB
extension cable to the USB port on the
player.
3. Connect the larger end of the cable to
the USB port on the computer tightly.
4. This screen will appear on the display of
the player.
EN
6
Note
Refer to the Software
Instruction manual for procedures in
setting up USB drivers and
transferring files to the player.
Note
Do not remove the Memory Card
during playback or when the power is
on. This may stop the unit from
playing immediately or damage the
memory on the memory card or the
player.
Before You Begin
Note
This screen could not be
changed even after choosing
Language setting in the menu.
Card Slot
Top view