Filter
Top Products
Other Connections
12
3. Connect the supplied Audio/Video cable’s white plug to
the
AUDIO OUTPUT L
jack on the rear of the DVD player
and connect the white plug’s other end to the TV’s
Audio Input Left jack.
±
±±
±
%100'%6+0)"61"#"68"#0&"#/2.+(+'4
You can also connect the DVD player to a TV and to a
stereo amplifier to enjoy high quality stereo sound.
1. Connect the audio/video cable’s left (white) and right
(red) plugs to your audio/video receiver’s Audio In Left
and Right jacks. Connect the other end of the cable to
your DVD player’s
AUDIO OUTPUT L
and
R
jacks.
2. Connect the audio/video cable’s yellow plug to the
VIDEO OUTPUT
jack on the back of your DVD player,
and the other yellow plug to the Video Input jack on
your TV.
±
"016'"
±
"
• Some TVs do not have an RCA
or S-Video jack, they only have a
coaxial antenna jack. In this
case, you must purchase an RF
modulator (not supplied,
available at your local
RadioShack store).
• When you connect the DVD
player to a TV, the DVD player’s
display and speakers remain on.
To turn off the display, slide OFF/
ON under the screen to OFF.
• You may turn the DVD player’s
volume to the minimum level
when listening to the TV’s
speaker.