Filter
Top Products
EN
6
Optional YM-8 and YM-8T Yoke Mounts
The YM-8 and YM-8T yoke mounts provide for mounting on most
any surface and are adjustable on one axis. A cover plate is pro-
vided for the loudspeaker’s rear recess and is secured with a
retaining screw. The cover plate has a wiring feed-through hole,
complete with rubber grommet and compression nut to prevent
water from wicking down the cable and into the electrical con-
nections.
The YM-8T yoke mount’s cover plate is equipped with an audio
matching transformer with 70V and 100V distributed audio input
capability.
Refer to the instructions included with the mount for detailed
information.
Optional YM-8 and YM-8T Mounting Procedure
1- Secure the yoke bracket to the mounting surface. Ensure
the mounting surface and supporting structure are appropri-
ately strong enough to support the loudspeaker assembly
and any potential vibration or seismic activity.
4- Choose the appropriate rubber sealing gasket and thread
the speaker wire through it. Make sure the tapered side of
the gasket is toward the cover. Push the gasket into its seat,
and thread the nut over the speaker wire and tighten.
2- Secure the loudspeaker to the yoke bracket.
3- Thread the speaker wiring through the cover plate.