Filter
Top Products
5
Getting started
1. If you have purchased the optional ChargePAK rechargeable battery, insert it into the
rear compartment before connecting the unit to the mains. Fully extend the aerial then
connect the unit to the mains using the power cable.
2. Press the Power button, if necessary, to switch the unit on.
3. When you see the menu ‘Enable Energy Saving?’ select either ‘On’ or ‘Off’ to switch
energy saving mode on or off (turn the Tune knob to choose an option and push to select).
When energy saving mode is switched on, the radio uses less than 1 Watt power in
standby because some standby functions such as the remote control and EPG are
disabled after 70 seconds.
You can turn energy saving mode on or off in the Energy saving menu.
For more information Energy saving mode: page 15 EPG : page 7
5. Select an autotune to find all the DAB radio stations in your area. Choose from:
United Kingdom Scans frequencies in Band III only
Rest of World Scans all frequencies in Band III and L-Band.
An autotune starts and tunes to a station when finished.
6. To change stations, turn the Tune knob to scroll through the station list, then push the
knob to tune to the highlighted station.
7. Push the DAB/SD/FM/AUX button to listen to SD, FM or the auxilliary input.
Navigating menus
You turn the Tune knob to scroll through menus, station or track lists and push the Tune knob
to select. In most menus if you do not select anything you return to the previous screen.
Alternatively use the equivalent ( + Select) remote control buttons.
Currently selected options in menus and lists are indicated by an asterisk (
*
).
To exit a menu or menu option press the Info button, alternatively press the Menu button to
exit to the previous menu.
³
Ò
³
EcoPlus