Filter
Top Products
13
Setting a timed event
You can use timed events to set up a DAB radio recording* or automatically tune in to a DAB
station. See page 8 for details of how to use EPG to set a timed event.
Menu > Alarm/timer > Timed events > Add an event
Turn the Tune knob and push to accept a setting and move to the next. Set the time, duration,
day, station and one of the following actions: Save to SD card, Send to digital out, Tune in, or
Cancel to return to the list without setting an event.
You see a clock symbol on the screen if a record event is set or a musical note symbol if a ‘Tune
in’ event is set. A crossed out clock is shown if an event is not due in the next 24 hours.
Changing a timed event
Menu > Alarm/timer > Timed events
1. Select the event you want to change.
2. Select Set to change the event settings or Off to delete the event from the list.
Cancelling a timed event
If a ‘Tune in’ event is underway you can cancel the end time of the event by pressing any
button. A record event can be cancelled by pressing the Record button.
Setting a sleep timer
You can set a sleep timer after which EVOKE-3 will switch itself into standby mode. You can
also set a sleep timer from standby which will switch the radio on first.
Press the Sleep button or Menu > Alarm/timer > Sleep time
Select a sleep time of 15, 30, 45, 60 or 90 minutes or select Off to set no sleep time.
Return to the Sleep menu again to view the time remaining or to change the sleep time again.
Using a ChargePAK
®
/batteries
As an alternative to mains power you can use six size ‘C’ alkaline or rechargeable batteries or use
the PURE ChargePAK rechargeable battery pack. When charge is low the battery icon flashes. Note
Always disconnect the radio from mains power supply before fitting or removing a ChargePAK or
batteries, your settings will be retained.
Using a ChargePAK
ChargePAK is a rechargeable battery pack which plugs into the socket in your radio’s battery
compartment. Whenever your radio is connected to a mains supply the ChargePAK will be
charging. When charging a ChargePAK the battery icon will be animated and when fully
charged the icon disappears. A complete charge should take around 10 hours in standby. To
purchase the correct ChargePAK model for your EVOKE-3, contact your nearest PURE dealer,
visit the shop on our website at www.pure.com or call the PURE order line on 0845 045
1122.
Battery safety
- Do not mix battery types or sizes
- Do not mix old and new batteries
- Remove used batteries as soon as possible to prevent leakage
- Dispose of old batteries carefully
- Orientate batteries as shown in the battery compartment
*
Record function provided for personal use only