PSB Speakers VS300 Portable Speaker User Manual


 
All VisionSound models are designed to maintain the same tonal balance when
different models are mixed in a system. Mixing a VS300, used as a center, with
VS400's as left and right is fine. The same model should be used in symmetrical
listening locations in a system – front left and front right; rear left and rear right.
Most surround sound (that is sound that comes from the surround speakers, not the
front speakers) is meant more to create greater depth and overall ambience than to
localize effects as coming from a particular spot. How much you prefer these
localized effects vs. overall sonic depth and diffusion is up to your listening
preferences. If you are listening to multi-channel music from DVD-Audio or SACD,
you may want the maximum localization of instruments. However, for most home
theater applications a diffuse sound field might be preferred. You can locate your
surround speakers to produce the effects you prefer, whether precisely pinpointed
or pleasantly diffused. In general, the farther the distance to the surround speakers
from the listener, the more diffuse the surround sound field. Diffusion can also be
created via directing the sound away from listeners, for example, your surround
speakers can be aimed towards a rear reflective surface for increased diffusion.
Proximity to Boundaries
The closer you place speakers to the boundary surfaces of your room, either to the
rear or to the sides, the greater the proportion of bass in their overall sound. This is
due to the enclosing, “focusing” effects of nearby surfaces on longer-wavelength
(lower) frequencies. Positioning the speakers near the intersection of two surfaces
(wall and wall, wall and floor, or wall and ceiling) will produce more bass than
placement near a single surface. The greatest proportion of bass is delivered by
placement near three intersecting surfaces–in a room corner near the floor or
ceiling, where the convergence of the two walls and the floor/ceiling produces an
amplifying effect that is a bit like that of a megaphone. And the least bass comes
from placing a speaker away from all boundaries. Your own tastes should decide
what proportion of bass response seems right in your room.
Of course, the VS300 is designed to be mounted on the wall with its included wall
mounting bracket. See section VII. Response Adjustment Switches for a discussion
of its special feature when wall mounted.
Where you sit in relation to your speakers obviously makes a difference too. The
proportions of the particular triangle formed by your front left and front right speakers
and you matter. (You may need to send more power to the more distant speaker to
compensate if you get much further from one speaker than the other.) The overall
distances involved also matter. As you get further from the speakers, more sound
reflected from your room's surfaces (in contrast to the sound coming directly from
the speakers) reaches your ears, and the original spatial relationships in a recording
are changed as your room “takes over.” Sometimes the result is a mellower, more
“integrated” sound. Other times, it's a more strident or annoyingly “echoey” – or
other – quality. Once again, the particular dimensions and surface materials of your
room play a part. And depending on what seems more realistic and/or enjoyable to
your ears, you may choose to sit at a great distance or have close-up, “near-field”
sound. Keep in mind that the right “toe-in,” the right speaker height, and a
reasonably symmetrical distance from the speakers all tend to work together to
deliver the best high-frequency definition and imaging.
6