Polk Audio RTi Series Portable Speaker User Manual


 
CASCADE TAPERED ARRAY
Place two drivers near each other and interference between the two drivers creates frequency response
errors (called “comb filtering”) for off-axis listeners; you won’t hear the same tonal balance as listeners
who are “on-axis” in the center of the listening area. Polk Audio multi-driver speakers, combat this with
“Cascade Tapered Array” crossovers. One driver is “crossed over” at a lower frequency than the other
driver, filtering out the frequencies where the interference will occur. The Cascade Tapered Driver Arrays
in select Polk multi-driver speakers produce clearer, more detailed sound and uniform tonal balance
throughout the room. The sound is consistently accurate whether the listener is standing or sitting, in-line
or off-axis. See more about Cascade Tapered Driver Array at www.polkaudio.com/catalog/technology/.
polk
technology
6 RTi SERIES LOUDSPEAKERS
SURROUND LOUDSPEAKERS
Two 1" silk/polymer composite dome tweeters
per speaker for smoother response and better detail.
A neodymium magnet with low-viscosity ferro-fluid
cooling and a heat sink on the back of the tweeter
assembly, create better power handling and reliability.
Mirrored, triangular cabinets that aim drivers and
tweeters in opposing directions to produce a more
enveloping sound field and wide, lifelike surround-
sound effects.
PowerPort with integral wall mount reduces turbulence
at the mouth of the port, while allowing simple wall-mounting.
5-way binding posts accept a variety of wiring connectors
and speaker cable up to 10 AWG.
ARC (Acoustic Resonance Control) Port reduces
midrange “boom” for clear, natural mids.
Bipole/Dipole switch for the most flexible placement
options and highest performance surround effects.
Available in black or white laminate finishes and grilles.
Two anti-diffraction grilles per speaker minimize grille
diffraction for spacious, 3 dimensional imaging.
F/XiA6
Flagship F/Xi series Bipole/Dipole surround speakers.
6 1/2" polymer composite Dynamic Balance mid/woofer
with rubber surround.
Recommended amplifier power 20-150 Watts/channel.
OVERALLDIMENSIONS:
143/4" H X13 3/8"W X 85/8" D(37.47CM HX 33.97CM WX 21.91CMD)
OVERALLFREQUENCY RESPONSE: 45Hz- 27kHz.
SEESPECIFICATIONSFORMORE DETAILEDPRODUCTINFORMATION.
BLACK MATTEWHITE
F/XiA4
Compact Bipole/Dipole surround speakers.
5 1/4" Polymer Composite Dynamic Balance mid/woofer
with rubber surround.
Recommended amplifier power 20-150 Watts/channel.
OVERALLDIMENSIONS:
12"H X 113/8" WX 7 7/16"D (30.48CMH X28.89CM W X18.89CM D)
OVERALLFREQUENCY RESPONSE: 50Hz- 27kHz.
SEESPECIFICATIONSFORMORE DETAILEDPRODUCTINFORMATION.
BLACK MATTEWHITE
F/XiA4
F/XiA6