Filter
Top Products
RTi SERIES LOUDSPEAKERS
The new RTi Series incorporates our latest Dynamic
Balance
®
Cone drivers, 1" tweeters and elegantly
redesigned cabinets that reflect the latest styles.
As you can expect from this highly popular line,
the performance is classic Polk Audio
®
. The bass/
midrange drivers used throughout the RTi,CSi,
F/X
®
i series employ Dynamic Balance polymer/
mineral composite cones with rubber surrounds.
Mylar bypass capacitors in the crossovers extend
high frequency response and improve detail and
transparency. RT i is Timbre-matched to the Polk
®
TCi in-ceiling/wall series so you can create a
seamless, multi-channel system.
RTi TOWERS
1" is a silk/polymer composite dome tweeter
for smoother response and better detail.
A neodymium magnet, low-viscosity ferro-fluid
cooling, and a heat sink on the back of the magnet,
create better power handling and reliability.
PowerPort
®
Plus is a patented enclosure venting
technology for maximum bass performance.
Magnetically shielded to allow safe placement
next to televisions or video monitors.
Dual 5-way binding posts allow bi-wiring
and bi-amplification and accepts a variety
of wiring connectors.
Damped Asymmetric Hex Laminate Isolation
(DAHLI) cabinet design for clean, accurate sound.
Finished in cherry or black oak real wood veneer.
Anti-Diffraction grilles minimize grille diffraction
for spacious, 3 dimensional imaging.
RT iA9
The flagship of the RTi series.
Three long-throw 7" woofers to combine the wide
dynamic range benefits of a single large woofer with
the tight, punchy, accurate bass response of small
woofers. Combined with PowerPortPlus, these
multiple woofers deliver deep high impact bass
with speed and accuracy.
Two 5 1/4" midrange drivers housed in their own
dedicated midrange enclosure provide exceptionally
detailed, powerful midrange.
Recommended amplifier power 50-500 Watts/channel.
OVERALLDIMENSIONS:
485/8" HX87/8" WX 21 3/8"D (123.51CMH X 22.54CMW X54.29CM D)
OVERALLFREQUENCY RESPONSE: 18Hz- 27kHz
SEESPECIFICATIONSFORMORE DETAILEDPRODUCTINFORMATION.
CHERRY BLACKOAK
DAHLI
Damped Asymmetric Hex Laminate Isolation (DAHLI) Cabinet Design for clean, accurate
sound. The asymmetric design is made from a 6-layer laminate with 5 viscous layers to create
the Optimal Shear Damping (OSD) system. The process was specifically developed for Polk.
Their elegant styling aside, creating curved cabinets not only results in a stronger, more rigid
and acoustically insert enclosure, but the curved walls also produce less audible coloration
from panel resonances.
polk
technology
2 RTi SERIES LOUDSPEAKERS
RTiA9