Filter
Top Products
DVC-2000
12
• Press VCR button to change into VCR Mode and follow the
procedures below.
1 Press the SETUP button on the remote control.
2 Press the ENTER button, while highlighting CLOCK SET.
3 Set the current date and time with button or
NUMBER button.
For DATE SET, follow the order of Month/Day/ Year ; for TIME
SET, follow the order of Hour/Minute in CLOCK SET screen.
4 Press SETUP button after completed.
VCR Setting
1 In VCR mode press the SETUP button on the remote control .
2 Press the button to select the “Program Set” and press
ENTER button.
3 Select “Channel”
• move into desired channel signal with up /down button
channel signal change like the orders below.
cable video 1 video 2 Antenna
4 Select “Start Date”
• Move into “Start Date “with button and then, select the
desired number to record with up/down button or number button
5 Select “REC cycle”.
• Move into “REC Cycle” with button and then, select the
desired one with up/down button
• REC cycle changes like the orders.
One Time weekly weekdays Daily
6 Select Start Time
• Move into “Start Time” with button and then, select the
desired number to record with up/down button or number
button.
7 Select End time
• Move into "End Time" with button and then, select the
desired number to record with Up/down button or number
button.
8 Select Tape Speed
• Move into "Tape Speed" with button and then, select the
desired one with up/down button
• Recording speed changes like the orders below.
SP SLP
• Press SETUP button to exit after completion.
• Press NEXT and PREV button to fisnish 8-event programming.
• Press the POWER button to activate timer recording.
• Only operating in stop mode.
• Press VCR button to change into VCR mode and follow the
procedure below.
1 Press the SETUP button on the remote control.
2 Press the button to highlight and select (Enter) the
“Channel Set”.
3 Selecting cable or antenna viewing
• You must set the viewing mode for your VCR, choosing either
CABLE (cable system connection) or ANTENNA(antenna
connection). To set the viewing mode:
• Press ENTER to toggle between CABLE and ANTENNA.
4 SELECT “Manual Set”
Move into “Manual set” with button to select one of add and
erase with ENTER button. Memorize channel and select the
desired channel when ENTER button is pressed, “Erase”
converts into “Add”.
Press NUMBER button and / button of remote control to
select the desired channel to memorize.
To check the memorized channels, press CH+/- button on
remote control. To delete Channels Manually, when ENTER
button is pressed, “Add” converts into “Erase”. Press NUMBER
button and / button on the remote control to select the
desired channel to delete.
To check the deleted channels, press CH+/- button on remote
control.
5 SELECT “Auto Preset”
• Press button in Channel Set to highlight “Auto Preset”
• Press ENTER button to detect the channel automatically.
1 Press the SETUP button on the remote control. The initial
MENU is displayed.
2. Press the button to select the “Language Select” and
press ENTER button
3 Select the language among English, Spainish and French.
Clock
Program
Channel
On-Screen Menu Language