Filter
Top Products
11
¾ Make sure that files of JPEG or WMA format are stored in the USB and the SD
card before the connection.
¾ Press the
SOURCE button to switch among disc playback, USB playback and the
SD Card playback. The default state is disk playback. Please see the below figure:
¾ Press the ,button to select the folder, and press ENTER/ENT button to enter.
¾ Press andbuttons to select the desired track. Then press PLAY or ENT to
start playback.
¾ Press STOP/ button to stop playback: if the STOP/ button is pressed, the
playback will start from the beginning of the current track. Press the button to
return to the folder menu.
Pull out the USB or SD card directly after the JPEG or WMA format files are played.
Then the unit will be in the state of disc playback again.
NOTE: the USB slot can not be used for digital camera with USB function or connected
with other devices.
1. Connect the unit with the electrical power.
2. Switch the power to ON.
3. insert the USB into the unit’s USB slot, or insert the SD card into the SD card slot
Please see the below figure:
4. Push SOURCE button on the front panel to switch among disc playback, USB
playback and the SD Card playback.
00:00 00:00
001/002
BAK
Using of USB and
SD Card