Filter
Top Products
How to record/play using the “Line-in” (MP3 Recording)
To record “Line-in”
To encode MP3 in internal/external memory connect the line-in cable to
the line-in jack on RipFlash and the other end (of the line-in cable) to the
line-out jack of your audio source, then press the [REC] key.
*If your audio source does not have a line out jack, then its possible to use the headphone jack
but be sure to test the volume levels (too high of volume will cause distortions, too low of volume
will create audio that is too quiet).
To play a recorded track
To playback MP3 recordings in internal/external memory, press the [Play]
key after selecting the desired track with the [Forward] or [Rewind] key.
How to interpret the menu
*Press the [Menu] key (when not in playback mode). Use the [Forward] and [Rewind] keys to
navigate through the menu system.
1. Delete mode
2. Line-in encoding mode
3. VAD mode
4. Line-in of Bit rate mode
5. Voice recording of Bit rate mode
6. SL mode
7. SI/SE mode
8. REC location select mode