Filter
Top Products
hOw tO OPtImIZE thE SOUND whEN
tV SPEAkErS ArE ON
You should hear sound from the bar. If you don’t, turn
up the volume on the bar using its volume control but-
tons. If your bar is connected to your TV, there’s a very
good chance your TV speakers are also playing. It’s
impossible to give specific instructions on how to turn
off the speakers for every TV, but here’s a way to do it
that covers many of the TVs out there.
1. On your TV remote control, find a “menu”
or “setup” button.
2. Press this button. You should see an
on-screen menu.
3. Next, look for an option to control audio
functions and select it.
The setting to turn off your TV’s internal speakers should
be here. If you can’t turn off your TV internal speakers,
don’t worry. To enjoy the best performance from your
bar, you’ll want it to play louder than your TV.
Use the following steps to adjust the volume balance
between your TV and the bar:
1. If necessary, program your bar to respond to the
volume up and down control commands of your
TV remote.
2. Turn your TV volume all the way down using the
control buttons on your TV.
3. Then, using the volume keys on your speaker
bar set the volume to a normal listening level
(do not use the remote control). After you make
these adjustments, your speaker bar should
always be louder than your TV speakers.
Then use the TV remote control to adjust the
volume as you normally do.
CUStOmEr SErVICE/tEChNICAl SUPPOrt:
For assistance with basic set up, operation,
or troubleshooting, you may contact our
customer service hotline at:
1 (800) 421-1404
Hours: Monday-Friday10:30 am-7:00 pm EST
Dimensions 35.98" W x 4.05" H x 4.74" D
Cabinet CARB2 MDF Wood
Finish Black Ash Vinyl
Frequency Range 45Hz - 20kHz
Drivers: Mid-Woofer 3" x 4 (2 Per Side)
Drivers: Tweeter 1" x 2 (1 Per Side)
Power Output 6 x 28 Watts (1kHz 1% THD @ 4 Ohms)
Inputs Toslink Optical x 1, Analog x 1
Bluetooth
®
A2DP Wireless 2.4 gHz
Voltage Inputs 100v - 240v
Power Consumption 60 Watts
Power Consumption (Standby) 2 Watts Power Off/4 Watts Auto Power Off
Power Consumption (Main Power Switch Off) 0 Watts
SPEAKER BAR
Dimensions 9.01" W x 10.01" H x 9.01" D
Cabinet CARB2 MDF Wood
Finish Black Ash Vinyl
Driver 6.5" Woofer
Voltage Input 100v-240v
Power Output 50 Watts (50Hz 1% THD @ 6 Ohms)
Power Consumption 60 Watts
Power Consumption (Standby) 1 Watt
SUBWOOFER
11
English
SPECIFICATIONS
Dimensions 28” W x 4.8” H x 16” D
Cabinet CARB2 MDF Wood
Finish Black Ash Vinyl
Frequency Range 58Hz - 20kHz
Drivers: Woofer 4” x 2 (Bottom mount)
Drivers: Midrange 3” x 2 (1 Per Side)
Drivers: Tweeter 1” x 2 (1 Per Side)
Power Output 6 x 28 Watts (1kHz 1% THD @ 4 Ohms)
Inputs Toslink Optical x 1, Analog x 1
Bluetooth
®
A2DP Wireless 2.4 gHz
Voltage Inputs 100v - 240v
Power Consumption (Standby) 0.5 Watts
Power Consumption (Main Power Switch O) 0 Watts
Complies with California Code of Regulations, CCR 93120.2(a) Phase 2.
Specications and designed subject to modication without notice.
PIONEER, the Pioneer logo, and the A. JONES logo are registered trademarks of Pioneer Corporation.
Bluetooth is a registered trademark of Bluetooth SIG, Inc. Bluetooth functionality requires a compatible A2DP prole Bluetooth-
enables device. Certain Bluetooth features may not be supported by all compatible Bluetooth-enabled devices, and/or the
functionality of such features may be limited in certain devices.