2 Push Multi-Control left or right to select
the equalizer band to adjust.
Each pushing Multi-Control left or right se-
lects equalizer bands in the following order:
Low (low)Mid (mid)High (high)
3 Push Multi-Control up or down to ad-
just the level of the equalizer band.
Each pushing Multi-Control up or down in-
creases or decreases the level of the equaliza-
tion band.
+6 6 is displayed as the level is increased
or decreased.
# You can then select another band and adjust
the level.
Note
If you make adjustments, Custom curve is up-
dated.
Fine-adjusting equalizer curve
You can adjust the center frequency and the Q
factor (curve characteristics) of each currently
selected curve band (Low/Mid/High).
Level (dB)
Center frequency
Q=2N
Q=2W
Frequency (Hz)
1 Use Multi-Control to select frequency
and the Q factor display.
Frequency and the Q factor (e.g., F80Q1W)
appears in the display.
2 Push Multi-Control left or right to select
the desired frequency.
Each pushing Multi-Control left or right se-
lects frequencies in the following order:
Low: 4080100160 (Hz)
Mid: 2005001k2k (Hz)
High: 3.15k8k10k12.5k (Hz)
3 Push Multi-Control up or down to select
the desired Q factor.
Each pushing Multi-Control up or down se-
lects Q factor in the following order:
2N1N1W2W
Note
If you make adjustments, Custom curve is up-
dated.
Adjusting bass and treble
Use this function to adjust the bass and treble.
The ability to select the frequency as well as
the level gives you good control over the total
balance of audio.
! If EQ-EX function has been selected and
EQ-EX turned on and Custom selected as
the equalizer curve, you can adjust bass
and treble settings.
1 Use Multi-Control to select Bass (bass
and treble level adjustment).
Bass appears in the display.
# If the treble level has been previously ad-
justed, Treble will be displayed.
2 Push Multi-Control left or right to select
bass or treble.
Pushing Multi-Control left and Bass is dis-
played. Pusing Multi-Control right and Treble
is displayed.
Audio Adjustments
En
44
Section
10