Filter
Top Products
Specifications
General
Power source .............................14.4 V DC (10.8 15.1 Val-
lowable)
Grounding system ...................Negative type
Max. current consumption
.....................................................10.0 A
Dimensions (W × H ×D):
DIN
Chassis .....................178 × 50 × 157 mm
(7 × 2 ×6-1/8 in.)
Nose ...........................188 × 58 × 18 mm
(7-3/8 × 2-1/4 × 3/4 in.)
D
Chassis .....................178 × 50 × 162 mm
(7 × 2 ×6-3/8 in.)
Nose ...........................170 × 48 × 13 mm
(6-3/4 × 1-7/8 × 1/2 in.)
Weight ..........................................1.3 kg (2.9 lbs)
Audio
Continuous power output is 22 Wper channel minimum
into 4 ohms, both channels driven50 to 15000 Hz with
no more than 5% THD.
Maximum power output....... 50 W × 4
Load impedance ......................4 W (4 8 Wallowable)
Preout maxoutput level/output impedance
.....................................................2.2 V/1 kW
Bass/Treble:
Bass
Frequency ................100 Hz
Gain ............................±12dB
Treble
Frequency ................10 kHz
Gain ............................±12dB
Loudness contour:
Low .......................................+7 dB (100 Hz), +4 dB (10
kHz)
High .....................................+10 dB (100 Hz), +6.5 dB
(10 kHz)
(volume: 30 dB)
CD player
System ..........................................Compact disc audio system
Usable discs .............................. Compact disc
Signal format:
Sampling frequency .....44.1 kHz
Number of quantization bits
...........................................16; linear
Frequency characteristics ...5 20000Hz (±1 dB)
Signal-to-noise ratio ...............94 dB (1 kHz) (IEC-A net-
work)
Dynamic range .........................92 dB (1 kHz)
Number of channels .............. 2 (stereo)
MP3 decoding format ...........MPEG-1 & 2 Audio Layer 3
WMA decoding format .........Ver. 7, 7.1, 8, 9, 10 (2ch
audio)
WAVsignal format .................. Linear PCM & MS ADPCM
FM tuner
Frequency range ......................87.9 107.9 MHz
Usable sensitivity .....................8 dBf (0.7 µV/75 W,mono,
S/N: 30 dB)
50 dB quieting sensitivity.....10 dBf (0.9 µV/75 W,mono)
Signal-to-noise ratio ...............75 dB (IEC-A network)
Distortion .....................................0.3 % (at 65 dBf, 1 kHz,
stereo)
0.1 % (at 65 dBf,1 kHz,
mono)
Frequency response ...............30 15000 Hz (±3 dB)
Stereo separation ....................45 dB (at 65 dBf, 1 kHz)
Selectivity .................................... 80 dB (±200 kHz)
Three-signal intermodulation (desired signal level)
.....................................................30 dBf (two undesired sig-
nal level: 100 dBf)
AM tuner
Frequency range ......................530 1710 kHz (10 kHz)
Usable sensitivity .....................18 µV (S/N: 20 dB)
Signal-to-noise ratio ...............65 dB (IEC-A network)
Note
Specifications and the design are subject to pos-
sible modifications without notice due to im-
provements.
Additional Information
En
24
Appendix