PIEGA User Manual
On-Wall Installation
You can use the wall bracket (available as an accessory) to mount the satellite loudspeakers either on the wall
or ceiling and thus use it as a rear or side speaker for both diffused and direct sound. The brackets are also
used when installing the loudspeakers for a room sound system. A special bracket is also available (as an ac-
cessory) for mounting the center loudspeakers on walls.
41 mm
60 mm
71 mm
~ 60-65mm
Note: For mounting the wall brackets consult a specialist such as your authorized
PIEGA dealer if necessary.
- Remove the hexagon screws
- Screw in the ball screws of the wall bracket and
lock with nuts
- Fix the wall bracket to the position provided for
it using the supplied screws and screw anchors
- Insert the ball screws in the wall bracket
- Align the loudspeaker and tighten the hexagon
screws using the supplied tool
- Do not move the loudspeaker any more
- Fasten the bracket to the wall
- Slightly unscrew the hexagon screws on the loudspeaker
- Fit the center loudspeaker on the wall bracket
- Re-tighten the hexagon screws
Wall bracket for satellites 1
Wall bracket for center speakers
Wall bracket for satellites 2
Wall bracket for satellites 3
8
PIEGA_Manual_uni_de_RZ.indd 21PIEGA_Manual_uni_de_RZ.indd 21 02.08.2007 10:39:42 Uhr02.08.2007 10:39:42 Uhr