Piega Loudspeaker Portable Speaker User Manual


 
PIEGA User Manual
Special care was taken in the packaging of your new PIEGA quality products in order to ensure that your
loudspeakers reach your living room safely and undamaged. In order to avoid any damage when unpacking
the loudspeakers, follow closely the instructions below without fail.
Procedure:
In order to avoid any damage when unpacking the
loudspeakers or during the installation, you should
always carry out the work with another person.
Before unpacking, remove any jewelry such as
watches, rings, bracelets etc. in order to avoid
scratching the aluminum surface.
Open the carton as shown in the fi gure, remove the
metal brackets on the carton carefully and lift out the
loudspeakers and protective cushions.
Carefully remove the protective cushions and protec-
tive wrapping by carefully pulling it up over the
loudspeakers.
Check without fail that the delivery is complete, that
the loudspeaker version supplied corresponds to
your order, and that the loudspeakers have not been
damaged in transit.
If this is the case, follow the instructions on the
remaining pages or otherwise contact the dealer
where you purchased the loudspeakers.
Warning:
PIEGA loudspeakers have cabinets made from
polished aluminum. When unpacking, handle
carefully at all times...!
Unpacking the Loudspeakers
5
PIEGA_Manual_uni_de_RZ.indd 24PIEGA_Manual_uni_de_RZ.indd 24 02.08.2007 10:39:43 Uhr02.08.2007 10:39:43 Uhr