Filter
Top Products
9
Note
The type plate information is located at the back or at
the underside of the WAC7500.
•
Turn on / switch to standby
You can select from the following status options:
On
Standby
Active standby. The
button on
the remote control can turn on the
WAC7500.
Eco standby
Passive standby. Only the
button
on the top panel can turn on the
WAC7500.
Note
If no buttons are pressed for 20 minutes, the WAC7500
switches to standby.
•
1 To turn on the WAC7500, press .
2 To switch the WAC7500 to standby, press
.
3 To switch the WAC7500 to eco standby,
press and hold the
button on the top
panel.
Note
When the WAC7500 is in eco standby mode, the
remote control is inactive.
•
•
•
•
•
•
3 Prepare
1 Open the battery compartment.
2 Insert 2 AAA batteries with correct
polarity (+/-) as indicated.
3 Close the battery compartment.
Position the WAC7500
Caution
Risk of product damage! Place the WAC7500 on a
surface that is level, at, and strong enough to support
the WAC7500.
•
Connect to AC power
Warning
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
or the underside of the WAC7500.
•
1 Connect the WAC7500 to the power
supply
Your WAC7500 turns on and is ready
to be set up for use.
»
Top view
English
EN