Philips PVD1079/12 Handheld TV User Manual


 
13
EnglishFrançaisEspañolDeutsch
Netherlands
ItalianoSvenskaDansk
The RED LED indicates that charging is in progress.
When the set is not in use, it will take about 6 hours to fully charge it.
However, when in use, it will take more than 8 hours to fully charge it.*
The RED LED will turn off when the set is fully charged. When the
low battery icon appears on the screen, please charge the set.
* Rechargeable batteries have a limited number of charge cycles and may
eventually need to be replaced. Battery life and number of charge cycles
vary by use and settings.
3.4 Switching on the TV
To switch on the TV, press and hold the POWER key on the top of the
set and the GREEN indictor also comes on.
VOLUME CHANNEL MENU POWER
1 2 3 4 9 2;
Notes:
1. For the fi rst time to power on the set, use the AC power adaptor.
2. In case of failure to power on the set with built-in batteries, use the AC
power adaptor to charge batteries.
3.5 Using the Remote Control
Open the battery compartment. Remove the protective
plastic tab (fi rst time users only).
Insert 1 x lithium 3V battery, type CR2025, then close the
compartment.
3.6 Remote Control functions (see fi gure
2
)
2
: Power On/Off the TV set
SOURCE: Switch between DTTV > Radio > USB > SD > AV-in >
ATV
TELETEXT
: Activate Teletext
AUDIO
: Audio language selection
1
2
1
2
3
4
P001-038_PVD1079_12_Eng.indd 13P001-038_PVD1079_12_Eng.indd 13 2008-02-01 1:26:20 PM2008-02-01 1:26:20 PM