Filter
Top Products
33
Mounting the set
Warning
Install the set as far as possible from sources of interference, such as a refrigerator, •
microwave oven, fluorescent lamp, and so on.
Install the set on a board that is at least 15mm thick.
•
1 Find a spot near a wall outlet and an antenna jack.
2 Verify the correct mounting direction.
3 Attach the mounting arm to the mounting surface.
Make sure that the mounting plate is parallel to the mounting •
surface.
4 Fix the supplied screws vertically and firmly into the board.
5 Detach all the connections from the set.
English
EN