Filter
Top Products
STANDBY-ON
TIMER SET
SLOW
VCR/TV
ZOOM
DISPLAY
3
456
789
SPEED
0
+10
2
1
VCRDVD
CLEAR
REPEAT
SETUP
TITLE RETURNMODE
C-RESET
A-B
AUDIO ANGLESUBTITLE
REC
REPEAT
DISC
MENU
OK
PAUSE
REW FF
PLAYSTOP
SKIP/
CH
SKIP/
CH
SEARCH MODE
Timer Recording (cont’d) 37
5
Press o or p until the month appears.
Then, press B.
Next, press o or p until the day appears. Then,
press B. The day of the week will appear. You cannot
record more than one year in advance.
Instructions continue on page 38.
• Enter the information while the
space is flashing.
• To stop a started timer recording,
press STOP/EJECT
C A
on the
front of the DVD/VCR.
More Helpful Hints are on
page 76.
Helpful Hints
6
To enter the recording’s start time, press o or p until
the hour appears. Press B.
Press o or p until the minute appears. Press B.
Finally, press o or p to point to AM or PM. AM or
PM will flash beside the start time. Press B.
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE 0 5 / 0 4 SUN
START TIME – – : – – – –
END TIME – – : – – – –
CHANNEL – –
REC SPEED – –
7
Repeat the procedure in step 6 to set the record-
ing’s end time.
8
Press o or p until the channel number appears.
Then, press B.
●If you are using a standard antenna/Cable TV hookup (as
shown on page eight), select the channel of the TV pro-
gram you want to record.
●If you are recording from other equipment, select L1 or
L2. To determine L1 or L2, refer to the Helpful Hint
below.
●If you are using a Cable Box/Satellite Receiver, select the
Cable Box/Satellite Receiver output channel (03 or 04).
Then, at the Cable Box/Satellite Receiver, select the chan-
nel you want to record. Leave the Cable Box/Satellite
Receiver on for the timer recording.
Details are on page nine.
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE 0 5 / 0 4 SUN
START TIME 0 7 : 3 0 P M
END TIME – – : – – – –
CHANNEL – –
REC SPEED – –
AM
BPM
5-8
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE 0 5 / 0 4 SUN
START TIME 0 7 : 3 0 P M
END TIME 0 8 : 3 0 P M
CHANNEL 16
REC SPEED – –