Filter
Top Products
11
English
Installation
Rear connections
Warning:
Never make or change connections with
the mains supply switched on.
Connecting FM/AM antennas
Connect the supplied AM/FM antennas to listen
to radio programs.
FMANT AMANT
VIDEO INAUDIO INRL
TV ANT
DC-12V
Supplied FM antenna
Supplied AM
loop antenna
Connecting TV antenna/CATV
● As shown, plug the supplied L-shape adapter into
TV ANT , and then connect a TV antenna/
CATV cable (not supplied).
Connecting an additional
appliance
It is possible to use an additional appliance, e.g.
VCR, video game player, with the set.
FMANT AMANT
VIDEO INAUDIO INRL
TVANT
DC-12V
AUDIO OUT
VIDEO OUT
External AV source
1 Insert the red plug of the red/white audio cables
(not supplied) to the red socket AUDIO IN R
and the white plug to the white socket AUDIO
IN L.
2 Connect the other end of the audio cables to
the AUDIO OUT terminals of the additional
appliance.
Helpful hints:
– If the connected device has only a single audio
out terminal, connect it to the AUDIO IN L
terminal. Alternatively, you can use a “single to
double” cinch cable, but the output sound will
remain mono.
– Always refer to the owner’s manual of other
equipment for complete connection.
FMANT AM ANT
VIDEO INAUDIO INRL
TVANT
AM Antenna
● Position the antenna as far as possible from a TV,
VCR or radiation source. If necessary, use 2
small screws (supplied) to fix the antenna to a
flat, hard and stable place.
FM antenna:
1 Fully extend the FM antenna.
2 Keep the FM antenna as horizontal as possible
(as far away as possible from the AC adapter,
VCR or other radiation sources).
3 Fix the antenna’s end to the wall.
Fix the claw
to the slot
FM ANT