Filter
Top Products
11
Note
The type plate information is located at the back or the
underside of the NP1100.
•
First-time setup
When you connect the NP1100 to the power
supply for the rst time, the player shows a
short demo and then displays the language
menu:
1 Press to select the language, then press
.
The display shows the date format
menu.
2 Press to select the date format, then
press
.
The display shows the time format
menu.
3 Press to select the time format, then
press
.
The display shows the date menu.
4 Press to select the date, then press .
The display shows the time menu.
5 Press to select the time, then press .
The display shows the network menu.
6 To complete the setup, continue with one
of the following chapters:
First-time setup: Wireless setu
p (see
‘Create wireless connection’ on page
12)
First-time setup: Wired setu
p (see ‘Create
wired connection’ on page
12)
»
»
»
»
•
•
4 Connect
Connect audio device
1 Use the supplied red and white audio
cables to connect the AUX IN jacks of the
sound system with the red and white
(see
‘Rear view’ on page
8)LINE OUT jacks
(see ‘Rear view’ on page
8) of the NP1100.
2 Set the source of the sound system to
‘AUX’.
3 Control the sound system as you normally
would.
Connect AC power
Warning
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
or the underside of the NP1100.
•
1 Connect the NP1100 to the power supply
2 Continue with the steps in chapterFirst-
time setu
p (see ‘First-time setup’ on page
11).
Connect
English
EN