Philips NP1100/12 MP3 Player User Manual


 
24
Wired standard 802.3 / 802.3 u
Speed 10
/ 100 MBit/s
Mode half
/ full duplex
Crossover detection
(Auto MDIX)
Yes
Display
Resolution Dot matrix 128 x 64 dots
Size 4.1
inches
Specications and external appearance are
subject
to change without notice.
Supported audio le formats
The NP1100 supports the following audio le
formats:
MP3
(8-320kbps and VBR)
WMA (up to 12kbps)
AAC (16-320 kbps and VBR16)
Note
The display of the NP1100 supports directories with
nesting up to a maximum of 8 levels.
Supplied accessories
Remote control
2 AAA batteries
AC power adapter with cable
RCA cable
PC connection requirements
The minimum requirements for PC connections
are:
Windows
2000 SP4 (or above) / XP SP2
/ Vista
Pentium III 500MHz processor or higher
256MB RAM
CD-ROM drive
9 Technical data
General
AC Power Voltage information is
printed on the back or the
underside of the NP1100.
DC Power 5 V / 1 A
Dimensions (w x
h x d)
195 x 104 x 38 mm
Weight (net) approx. 0.44kg
Power consumption
On < 5W
Standby (active) < 4W
Audio output
Line out 2x Cinch, 500 mV, 20
- 20000 Hz
SPDIF 1x
Cinch (Coax), 0.5 V,
75 Ohms
Headphone 1x
3.5 mm jack, 1 V, 30
- 16000 Hz
Signal to noise ratio
(line out)
typ. 85 dBA (IEC)
Signal to noise ratio
(heaphone)
typ.
75 dBA (IEC)
Distortion (line out /
headphone)
<
0.3 %
Wireless
Wireless
standard
802.11g, backwards
compatible to
802.11b
Wireless
security
WEP
(64 or 128 bit),
WPA/WPA2 (8-63 characters)
Frequency
range
2412
- 2462MHz CH1-CH11 (for
/79, /37, /55, /97)
2412 - 2472MHz CH1-CH13 (for
/12, /05)
Antenna 2x
internal, diversity mode enabled
Wired (LAN / Ethernet)
EN