Filter
Top Products
8 EN
3 Get started
Caution
• Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
bottom of the apparatus. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
Install batteries
Note
• You can only use AC power as power supply. Batteries
(not supplied) are for backup purpose.
1 Open the battery compartment.
2 Insert 2 x R6/UM-3/AA size batteries with
correct polarity (+/-) as indicated.
3 Close the battery compartment.
Caution
• Remove battery if it is exhausted or will not be used
for a long time.
• Batteries contain chemical substances, so they should
be disposed of properly.
• Risk of explosion! Keep batteries away from heat,
sunshineorre.Neverdiscardbatteriesinre.
Connect power
Caution
• Risk of product damage! Ensure that the power voltage
corresponds to the voltage printed on the back or
underside of the unit.
• Risk of electric shock! When you unplug the AC power
cord, always pull the plug from the socket. Never pull
the cord.
• Before connection of the AC power cord, make sure
that you have completed all other connections.
Note
• The type plate is located at the bottom of the unit.
• Connect the AC power adapter to:
• the AC ~ socket on the back of the
unit.
• the wall outlet.
DC IN
7.5V
2.5A