Filter
Top Products
10
Prepare the remote control
Caution
Risk of explosion! Keep batteries away from •
heat, sunshine or fi re. Never discard batteries
in fi re.
For fi rst-time use:
1 Remove the protective tab to activate the
remote control battery.
To replace the remote control batteries:
1 Open the battery compartment.
2 Insert one lithium CR2025 battery with
correct polarity (+/-) as indicated.
3 Close the battery compartment.
Note
Before you press any function button on the •
remote control, fi rst select the correct source
with the remote control instead of the main
unit.
If you are not going to use the remote control
•
for a long time, remove the battery.
Set clock
1 In standby mode, press PROG/CLOCK
on the remote control to activate the
clock setting mode.
The 12 hour or 24 hour format is »
displayed.
Connect power
Caution
Risk of product damage! Ensure that the •
power supply voltage corresponds to the
voltage printed on the back or the underside
of the unit.
Risk of electric shock! When you unplug the
•
AC power cord, always pull the plug from the
socket. Never pull the cord.
Before connecting the AC power cord, ensure
•
you have completed all other connections.
Note
The type plate is located on the back of the •
main unit.
1 Connect the power cord to the
AC~MAINS jack on the main unit.
2 Connect the power plug to the wall
outlet.
EN