Filter
Top Products
English
23
Clock/Timer
Clock setting
The clock can be set in either 12-hour or
24-hour mode (12HR or 24HR for example).
1 In standby mode, press PROG.
➜ SET CLOCK is displayed briefly. Then, 12HR
or 24HR is displayed.
2 Press ALBUM/PRESET +/- (or ¡ / ™ on the
remote control) to select clock mode.
➜ The clock digits for the hours continue to
flash.
3 Press ALBUM/PRESET +/- (or ¡ / ™ on the
remote control) to set the hours.
4 Press PROG again.
➜ The clock digits for the minutes flash.
5 Press ALBUM/PRESET +/- (or ¡ / ™ on the
remote control) to set the minutes.
6 Press PROG to confirm the time.
Timer setting
● The system can be used as an alarm clock,
whereby the CD, TUNER, USB or DOCK is
switched on at a set time (one time operation).
The clock time needs to be set first before the
timer can be used.
● During setting, if no button is pressed within 90
seconds, the system will exit timer setting mode
automatically.
1 Press TIMER for more than two seconds.
2 Press SOURCE repeatedly to select the sound
source.
➜ “SET TIMER” and “SELECT SOURCE” are
displayed.
3 Press TIMER to confirm your desired mode.
➜ The clock digits for the hours flash.
4 Press ALBUM/PRESET +/- (or ¡ / ™ on the
remote control) to set the hours.
5 Press TIMER again.
➜ The clock digits for the minutes flash.
6 Press ALBUM/PRESET +/- (or ¡ / ™ on the
remote control) to set the minutes.
7 Press TIMER to confirm the time.
➜ The timer is now set and activated.
Activating and deactivating timer
● In standby or during playback, press TIMER
once on the remote control.
➜ Display shows if activated, and disappears if
deactivated.
TIMER
iPod
pg001-029_DCM230_37-Eng 1/9/08, 16:0623