Philips DC200/93 Clock Radio User Manual


  Open as PDF
of 16
 
– USB flash memory (USB 2.0 or USB 1.1)
– USB flash player (USB 2.0 or USB 1.1)
• USBdevicewhichrequiresdriverinstallationunderWindowsXPisnot
supported.
Notes:
In some USB flash players (or memory devices), the stored contents are
recorded using copyright protection technology. Such protected contents
will be unplayable on any other devices (such as DC200 device).
Supported formats:
– USB or memory file format FAT12, FAT16, FAT32 (sector size: 512 -
65,536 bytes)
– MP3 bit rate (data rate): 32-320 kbps and variable bit rate
– WMA v9 or earlier
– Directory nesting up to a maximum of 8 levels
– Number of albums: maximum 99
– Number of tracks: maximum 999
– ID3 tag v2.0 or later
– File name in Uicode UTF8 (maximum length: 128 bytes
The system will not play or support the following:
• Emptyalbums:anemptyalbumisanalbumthatdoesnotcontainMP3/
WMA files, and will not be shown in the display.
• Non-supportedfileformatsareskipped.Thismeansthate.g.:Worddocuments
.doc or MP3 files with extension. dlf are ignored and will not be played.
• AAC,WAV,PCM.NTFSaudiofiles
• DRMprotectedWMAfiles
• WMAfilesinLosslessformat
PLAYING A USB MASS STORAGE DEVICE
1
Make sure your DC200 is being powered on by AC mains.
2
Press SOURCE repeatedly to select the USB mode.
3
Plug a compatible USB mass storage device to DC200’s USB port
marked
. If needed, use a suitable USB cable to connect between
the device and DC200’s USB port.
™
The device will automatically power on.
 previous next